The Industrial Camera and Machine Vision Solutions Company








  ROHS Compliance









  >> Site Map

 

 

 











 

 

 

 

 

 
 
 
 
Home  |  General Information  |  Find a Rep  |  Trade Shows  |  Order  |  Contact  

 Firewire  |  PoCL  |  Progressive Scan  |  Interlaced  

Hitachi Kokusai Electric America
Hitachi KP-F230 PCL
PoCL (Power over Camera Link) Camera
(view product catalog in ADOBE PDF)

Hitachi KP-F230 PCL PoCL Cameras

The PoCL version is connected by a single (PoCL) Mini Camera Link cable directly to a frame grabber supporting PoCL. Simple systems construction is possible.

  • High Resolution & High Speed
    High resolution combined with high frame rates are possible with this series of cameras. Can be used for high-precision and high-speed image processing in many applications.
  • Frame Shutter
    Higher resolution in the vertical directional is ensured for moving object.
  • Multi-step Shutter
    Provided multi-step shutter or variable shutter (minimum 1/100,000 second) .
  • Frame on Demand
    The trigger and the shutter can be used to capture an image at the desired timing and the accumulation time.
  • Remote Control
    Through the Camera Link interface, various setting such as shutter, mode, gain, partial scan, bit width, etc can be adjusted.

Specifications

Imager 1/1.8-inch interline CCD
Total pixels 1688 (H) x 1248(V)
Effective pixels 1628 (H) x 1236(V)
Active pixels 1628 (H) x 1236(V)
Pixel size 4.4 (H) x 4.4 (V) µm (square lattice)
Sensing area 7.16 (H) x 5.44 (V) mm
Scanning system Progressive
Aspect ratio 4:3
Frame rate 30 frames/second
Horizontal drive
frequency		 72.000 MHz
Scanning frequency Horizontal: 37.5 kHz
Vertical: 30 Hz
   
Sync system Internal
Lens mount C mount
Flange focal distance 17.526 mm
Video output Digital output Camera Link
Clk = 36 MHz x 2 TAP
Resolution Horizontal/Vertical: 1200 TV lines
Sensitivity 400 lx, F4, 3200 K
Minimum illumination 7.4 lx, F1.4, MAX GAIN
Signal noise to ratio 45 dB
Electronic shutter speed 1/30 to 1/100000 second
(variable setting)
Gamma compensation y = 1
Frame on demand One trigger, fixed shutter and VD reset
Partial scan Selectable start position and width of picture grabbing in 1H step.
Offset 0 to 128 steps level/10bit 33 steps variable (Factory setting: 0 steps
level)
Gain Setting 0 to +12 dB (128 steps variable)
Ambient temperature Operating: 0 to + 40°C (+32 to +104ºF), less than 90 % RH
Storage: -10 to + 50°C (+14 to +122ºF), less than 70 % RH
Power supply 12 ±1 VDC
Current consumption Approx. 270 mA (Approx. 3.3 W)
External dimensions 29 (W) x 29 (H) x 38 (D) mm
Mass Approx. 60 g

 


<< Our Industry Blogs - Carolynn's | Nicole's >>
© 2008 Aegis Electronic Group Inc., All Rights Reserved.