| Imaging
device |
1/2
inch Inter-line CCD with micro lenss on chip |
| |
NTSC
|
PAL |
|
Effective pixels |
768
(H) x494 (V) |
752
(H) x582 (V) |
|
Total pixels |
811
(H) x508 (V) |
795
(H) x595 (V) |
|
Scanning system |
2:1
interlaced |
| Scanning
frequency |
NTSC
|
PAL |
Hor.
|
15.734
kHz |
15.625
kHz |
Vert. |
59.94
kHz |
50
Hz |
| Resolution |
NTSC |
PAL |
NTSC/PAL |
Standard |
H:480
TVL |
H:470
TVL |
V:350 TVL |
Exposure |
H:440
TYL |
H:440
TVL |
V:260 TVL |
| Signal-to-noise
ratio |
50
dB |
| Sensitivity |
Standard |
Max |
|
|
1.0
lx(Max AGC) |
0.01
lx(AGC max. 6.4x. F1.2) |
| Illumination
range |
0.01
lx to 100.000 lx(f1.2 ES lens) |
| Signal
processing system |
Digital
signal processing A/D:10-bit Processing:8-bit |
| Video
signal output |
Composite
video signal:1.0 Vp-p/75 ohm, unbalanced
BNC connector |
| Sync
system |
Internal
or external(Line Lock). |
| AGC |
ON/OFF
switchable
Max gain at ON:6,12, 21, 31 dB(Factory setting:21
dB) |
| Electronic
shutter speed |
11steps
selectable
1/60 (PAL,1/50),1/100,1/250,1/500,1/1000,1/2000,
1/4000,1/10,000,1/20,000,1/30,000,AUTO. |
| Backlight
correction |
Backlight
correction using 9 photometric areas. |
| Output
for auto iris lens |
Video
signal input type or iris cntrol voltage input
type
switchable.
(1) Video signal input type lens mode (VIDEO)
Video signal:1.0 Vp-p/high impedance
Power supply:12 VDC,max.60 mA
(2) Iris control voltage input type (Galvanometer
type)
lens mode (DC)
Impedance
Damper:1150 ohm ±10 %
Driv:190 ohm ±10 %
Connector:Square type, 4-pin |
| Text
display |
Up
to 24 alphanumerics can be displayed and position
can be set. |
| White
balance control |
3
control modes selectable (1) Auto tracking (ATW)mode
(2) Preset (AWC) mode (3) Manual (MANUAL)mode
(R/B gain adjustment) |
| Sensitivity
setting |
Automatic
sensitivity (AUTO) or fixed sesitivity (MANUAL)
selectable.
Maximum sensitivity can be set in AUTO mode.
Standard sensitivity (NTSC:1/60 s, PAL:1/50 s)
or 2 to
64 times. |
| Electronic
zoom |
Max.
magnification:4 times |
| Picturre
quality |
Adjustment
of each item and selection of each mode |
| adjustment
menu |
can
be made, using menu screens.
(1) Text display ON/OFF, text editable, display
position
settable (TOP or BOTTOM).
(2)Level detection area selectable
(3)Iris level adjustable
(4)AGC ON/OFF
(5)White balance
(6)Shutter speed
(7)Gamma correction ON/OFF
(8)Video signal polarity selectable
(9)Chroma level adjustable
(10)Black level adjustable
(11)Contour correction amaunt adjustable
(12)Exposure time setting AUTO/MANUAL
Max. exposure time can ve set, up to 2 to 64 times
in step by fields in AUTO mode.
(13)Electronic zoom
Zoom ratio: Nomal to 4 times (Adjustable). |
| Lens
mount |
C/CS
mount (C-mount adaptor) |
| Camera
mount |
Bottom:
1/4 ", 20UNC
With supplied tripod adaptor TA-231 needed |
| Operating
conditions |
-10
to +50 °C, 30 to 80 %RH |
| Storage
conditions |
-20
to +60 °C, 20 to 90 %RH |
| Anti-vibration
|
3G
or less |
| Power
supply |
U:
117 VAC ±10 %, 60 Hz, E/K:230 VAC ±10
%, 50 Hz |
| Power
consumption |
KP-D591U
6 W
KP-D591E/K 7 W |
| Dimensions
|
64
(W)x63 (H)x122 (D)xmm (Excl. lens and protusions) |
| Mass |
KP-D591U
740 g
KP-D591E 750 g
KP-D591K 700 g |
| Composition
|
Camera
KP-D591/KP-D28
Operation manual x1
Fuse x1
C-mount adaptor x1 Lens plug(E4-191J-100) |
| Optional
accessories |
Lenses
Remote plug, HR10A-10P-12P(01) |
